• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a suzuki ignis key (cameradb.Review)

suzuki key cutting's quirky, cheap little city car is getting a midlife upgrade. It's no hot-hatch but it is able to eat dirt roads in rural and urban areas with aplomb, and its nifty turning circle makes city driving a breeze.

The new model also packs clever safety and driver assistance features with features like lane departure alerts and a drowsiness alarm which is a great feature for long drives.

Steering Lock

The steering lock is an important security feature to stop your Ignis from being taken away when it's in drive. It's a great safety feature but it can be a hassle when you're in a rush and can't unlock the wheel. There are some simple steps you can take to fix the issue.

Verify first that the ignition switch is set to "on". If this is the case, then try turning the key in the same direction as you did before the wheel was locked. This could be difficult but usually enough to unlock the wheel.

If the wheel won't open after spraying canned air into the ignition cylinder, you can apply lubrication to the cylinder. Make sure you wear eye protection prior to doing this so that you do not get any air that has been sprayed into your eyes! Liquid graphite may also work to lubricate the cylinder.

If none of these strategies work, you'll need to replace the ignition lock assembly. This component can be found in any auto parts shop. Be sure to buy an identical replacement and then compare it to your old one before attempting to install it. Also, be sure to remove the cover covering the ignition so that you can be able to see and access the ignition.

Worn

The steering lock can cause the ignition switch to become stuck. This safety feature is designed to keep your Ignis from rolling while the engine is running. If this happens, turning the steering wheel will unbind it.

As time passes, your Ignis key can start to wear out and become more difficult to turn. This isn't the same as a faulty ignition switch, but it can happen. If this is the situation you need to replace your ignition key.

Also, determine if there's something that is blocking your Ignis key from entering the ignition cylinder. Sometimes, there is debris or dirt that can get stuck inside and stop the key from turning exactly as it is supposed to.

You could also try a little lubricant to see whether it will help. There are many different types of lubricant you could buy, so look around your garage or an auto parts store in your area to find one that will work.

Another alternative is to choose an silicon "glow in the dark" key cover. These covers absorb light and release it into dark or murky conditions. They also help to protect your fob or key from wear and tear. They are available for all suzuki key replacement uk models and are available via the internet or from a local Suzuki dealership.

Bent

In time and over time, with repeated use, keys can be bent. The teeth of the key could not connect to lock cylinders in the same way. This can prevent the key from turning. If this is the case the key will need to be replaced. If you have spare keys, it's recommended to get it duplicated, and keep it in a safe location.

Another possibility is that the cylinder for ignition itself could wear out. The lock pins inside could become stuck together, preventing the key from being able to go through or out of the ignition cylinder. Replacing the cylinder could solve this issue, however it is best to do this before your key is stuck in the ignition, to avoid further damage.

If your Ignis keys remain stuck, even after you've tried the more straightforward solutions, it might be time to lubricate the cylinder. Graphite powder or liquid graphite can aid in allowing the lock pins to move more freely, and also free your key. You can buy it in a lot of auto parts stores. When applying the lubricant, ensure that your Ignis is in park. Don't attempt to manipulate it to loosen it. This could cause more serious problems.

Broken

If you have tried all of the easier ways to make a key unstick and it still won't budge, the last resort is to apply fluid to get it moving. You can purchase this lubricant at a local auto parts store and apply it with either a cotton swab, or an abrasive to the inside of the lock cylinder. Move the key back and forth gently to spread the lubricant and try again. If you are able to massage it forward, do it, but do not push too hard or you could break it off in the cylinder.

It's also possible that the circuitry inside the key will become unresponsive as time passes. This isn't as frequent as it sounds, so you'll need to make a duplicate of the key.

The case of your suzuki swift key key fob might be damaged or worn out. This is most likely if you are using a cheap replica key fob that has a plastic or rubber shell. Based on the circumstances, The Key Crew can sometimes migrate the internal circuitry of the old key fob to the shell of a new case, avoiding the need to pay for an entirely new key fob. When we contact you to schedule your service, we'll tell you if this is a viable option.